Silk-screen webbing and thermal transfer webbing are two common LOGO production methods in production. What is the difference in actual use. The process and method of silk screen printing ribbon: first select your favorite ribbon and then pour ink on one end of the screen printing plate when printing, apply a certain pressure on the ink part of the screen printing plate with a scraper, and at the same time move towards the silk screen The other end of the screen printing plate moves. The ink is squeezed by the scraper from the mesh of the graphic part to the substrate during the movement. In this method of production, the ink is attached to the fabric. Therefore, there will be a strong sense of ink, and large-area printing will make the ribbon hard. The advantage of this kind of webbing is its bright color. The LOGO is prominent and obvious. The disadvantage is that if the adhesion of the fabric is not strong, it will easily fall off, especially if it is washed or scraped. And because most of the ribbons are hand-screened. Overprinting LOGO is easy to be inaccurate. The yield is not high either.

Strictly speaking, thermal transfer printing in webbing production should be called thermal sublimation, which is also a product of the post-Olympic era. The principle of Olympic lanyard webbing is to print on paper with special ink that is easy to sublime and then heat it to sublimate and transfer. onto the fabric. The sublimated ink penetrates the fabric. Therefore, the lanyards made by thermal transfer printing will not be discolored. But its color is not as obvious as silk screen printing. Because it is a machine-printed transfer paper, the heat-transferred lanyard is very accurate in multi-color conditions. There will be no unfavorable situations such as deviation. In the case of a small amount of production, the thermal transfer ribbon will have no price advantage due to the high cost of the board. However, in mass production, due to machine printing, there will be a gap in price and production time.